Reliability Engineering Training: An Introductory Course for Beginners in Reliability Analysis Techniques, Methods and Improvements

This Reliability Engineering training course teaches foundational Reliability Engineering knowledge, techniques and analysis methods

Learn Reliability Engineering basics, application of analysis tools, reliability strategy development, and implementation of workplace improvements

 

Reliability Engineering Training Course for Beginners

 

This online tutored distance education Reliability Engineering training course is for people who want to use basic Reliability Engineering to do reliability analysis.

You are taught the foundational reliability engineer concepts and methods, and how to apply the fundamental failure investigation techniques. You also learn a range of effective workplace improvement solutions used in Reliability Engineering.

This introductory reliability course is intentionally structured to show you a wide variety of Reliability Engineering knowledge and important applications. Throughout the course you stay focused on the important education new-comers to Reliability Engineering need. You get to know the extent of Reliability Engineering and how it’s used analyses and investigates reliability issues and pinpoints solutions. The course has a broad coverage of Reliability Engineering and its methodologies without getting drowned in high-level reliability math.

Reliability Engineering Training Course Textbook Extract

 

1 Introduction

Reliability Engineering looks hard to do to newcomers. Much of it is not. For everyday use in industrial operations many reliability engineering methods, techniques, and analyses are straightforward to use.

The Reliability Engineering explanations in a Reliability Engineering textbook look difficult. When you open up those books you see complex diagrams, confusing tables and charts, and statistics and probability math equations. But the Reliability Engineering textbook in this course is kept as simple as possible. The chapters start with an example to show you the use of Reliability Engineering in a practical way. Useful theory and the least math is provided only where its inclusion is valuable to understanding the topic.

The images in the book mostly come from the Reliability Engineering Training: An Introduction for Beginner’s Course presentation slides. The slides in the course cover the relevant topics and information a newcomer to Reliability Engineering needs to know. The textbook is focused on providing information and explanations related to the assignments in the course. It complements the slides and gives more details on issues and knowledge required to complete assignments well.

This book is for the every-day, practical situations that commonly arise on the operating plant and equipment in industrial companies and in vehicle fleets. It provides fundamental Reliability Engineering techniques and methods used to extract useful intelligence and solve the reliability problems of operating assets.

 

The Reliability Engineering Training: An Introductory Course for Beginners, was developed by expert, university-trained professionals with decades of practical experience in in reliability engineering and maintenance management. The content was intentionally selected to ensure beginners were educated and trained in the most useful foundational knowledge and techniques. All the topics and methods with the greatest benefit and worth for newcomers in analyzing and solving reliability problems is what you learn in this reliability engineering course.

Once you successfully pass all assignments and do a workplace reliability improvement project you receive a training certificate recognizing the new capabilities you have gained.

The course is suitable for Managers, Engineers, and specialists in the following and related disciplines and roles who want to learn reliability engineering fundamentals:

  • Industrial Engineering
  • Operations Management
  • Operations Engineering
  • Project Engineering
  • Engineering Asset Management
  • Maintenance Management
  • Production Reliability Management
  • Maintenance Engineering
  • Reliability Technicians
  • Operations Engineering
  • Safety Engineering
  • Safety Management
  • Risk Engineering
  • Risk Management
  • Defect Elimination Management
  • Engineering Graduates
  • Data Analysts
  • Quality Management

The Reliability Engineering Training: A Beginners Course is self-paced and you start your training as soon as you get the first module.

As you do the Reliability Engineering training course you’ll need the following requirements: advanced high school math, including algebra and statistics; spreadsheet data analysis and charting; access to operating equipment, machinery, or vehicles operating and maintenance history.

 

Overview Reliability Engineering Training: A Beginners Course Coverage

During your training you’ll learn foundational Reliability Engineering math, the key analysis methods and techniques, use the common reliability improvement investigative tools, and justify and implement reliability projects for operating assets.

The purpose of each module and its coverage are noted in the table below—Module 1 introduces the reliability basics; Module 2 gets you using reliability tools; Module 3 shows how to implement and embed reliability improvements.

Module 1: Foundations

  • Using Reliability Engineering in Business
  • Causes of Plant and Equipment Failure
  • Reliability Theory of Failure Patterns
  • From Failure Data to Business Case
  • Condition Monitoring and Maintenance Excellence
  • Criticality and Risk

Module 2: Apply Tools

  • FMECA and RCM
  • Maintenance Strategy Review
  • Cost Effectiveness and Cost Benefit
  • Key Performance Indicators and Benchmarking
  • Human Error Human Factors
  • System Reliability Modelling

Module 3: Implement

  • Preparing Maintenance Procedures
  • Life Cycle Considerations
  • Root Cause Analysis
  • Implementing Improvements
  • Do a Reliability Improvement Project

Reliability Engineering Training Course for Beginners Learning Plan

Students follow a Learning Plan where the course content covered in each module is subdivided into particular topics relevant to the material being taught.

Click the link below to view a PDF document of the Student Learning Plan detailing the contents in each course module. During your training you will review each topic in the Learning Plan, and do a range of assignments as you work your way through the course.

Reliability Engineering Training: An Introductory Course for Beginners Learning Plan

Download these PDF documents for more details and information about the approach used in this foundational reliability engineering training course via online distance education.

Reliability Engineering Training for Beginners Course Workbook Content Page

Reliability Engineering Training Course for Beginners Sample Slides from Modules 1, 2, and 3

 

Not sure that this introductory reliability engineering training course is right for you? Contact Us and tell us what you want to achieve from the course, and we’ll advise you.

 

Purchase Information for Reliability Engineering Training Course

Each module’s pricing is listed at the online store. Module 1 is the most intensive part of the course and introduces you to Reliability Engineering know-how and failure analysis. It is the most costly of the three modules. The total price you pay for the 3-module Reliability Engineering Training Course for Beginners by online distance education is AUD $1,000 per student.

Once a module is purchased you receive an automated email with your payment receipt and a second automated email with the link to download the module over the Web. You can buy the entire course at once if it is easier for your company to process a single amount rather than handle separate payments for each module. Simply add all three modules to the online store shopping cart, or request an invoice from us for the whole course.

To buy the training modules follow this link to the online store All Modules in the Reliability Engineering Training for Beginners Course by Online Distance Education.

The training course materials are not available by postal mail. We provide only online downloads of the training course contents.

 

How to Start the Reliability Engineering Training Course for Beginners

You register for the training course by sending an email to us requesting registration. You get a reply email from us with all the registration information. Or, you can go directly to the online store and buy Module 1 to start your training. If you buy Module 1 at the store we will send you information by email confirming your registration. Get our email address from the Contact Us Page.

To start your training, buy Module 1 of the the Reliability Engineering Training Course for Beginners from the online store. You’ll receive an automated email from the store with the module download link. The link is only active for 24 hours. Click on the link and save the module to your computer hard drive.

You also receive a ‘welcome to the course’ email from us explaining how the course works and introducing you to your tutor. You can start your training immediately. Review the content in each module slide, work through the examples, watch any applicable online reliability and maintenance training videos, do additional research and study, then complete the assignments and send each assignment one-at-a-time to your Tutor to review.

You do each module in the Reliability Engineering Training Course for Beginners one-by-one until it is complete. As you arrive at an assignment you do it and send it as an email attachment to your Tutor. The Tutor checks the assignment you submit and gives you feedback and advice on how to complete it well. Once you pass Module 1 assignments you then purchase the next module and continue with learning more foundational reliability engineering training. After you complete all modules you receive your Beginners Reliability Engineering Training Course certificate.

If you have questions about the online distance education the Reliability Engineering Training Course for Beginners please Contact Us by email.

 

All the best to you,

Mike Sondalini
Managing Director
Lifetime Reliability Solutions HQ